GET
https://api.linode.com/v4/networking/firewalls
Returns a paginated list of accessible Firewalls.
Authorizations
personalAccessToken
oauth
firewall:read_only
Query Parameters
page
Type:
integer
>=
1
Default:
1
Default:
1
The page of a collection to return.
page_size
Type:
integer
25..500
Default:
100
Default:
100
The number of items to return per page.
Request Samples
Response Samples
Responses
Firewall Create
POST
https://api.linode.com/v4/networking/firewalls
Creates a Firewall to filter network traffic.
Use the rules property to create inbound and outbound access rules.
Use the devices property to assign the Firewall to a service and apply its Rules to the device. Requires read_writeUser’s Grants to the device.
Currently, Firewalls can only be assigned to Linode instances.
A Firewall can be assigned to multiple Linode instances at a time.
A Linode instance can have one active, assigned Firewall at a time.
Additional disabled Firewalls can be assigned to a service, but they cannot be enabled if another active Firewall is already assigned to the same service.
A firewall_create Event is generated when this endpoint returns successfully.
Authorizations
personalAccessToken
oauth
firewall:read_write
Request Samples
Request Body Schema
devices
object
Devices to create for this Firewall.
When a Device is created, the Firewall is assigned to its associated service.
Currently, Devices can only be created for Linode instances.
linodes
array
of integers
An array of Linode IDs. A Firewall Device is created for each ID.
label
Filterable
Required
string
3..32
characters
The Firewall’s label, for display purposes only.
Firewall labels have the following constraints:
Must begin and end with an alphanumeric character.
May only consist of alphanumeric characters, dashes (-), underscores (_) or periods (.).
Cannot have two dashes (--), underscores (__) or periods (..) in a row.
Must be between 3 and 32 characters.
Must be unique.
rules
Required
object
The inbound and outbound access rules to apply to the Firewall.
A Firewall may have up to 25 rules across its inbound and outbound rulesets.
inbound
array
of objects
The inbound rules for the firewall, as a JSON array.
action
Required
string
Enum:
ACCEPTDROP
Controls whether traffic is accepted or dropped by this rule. Overrides the Firewall’s inbound_policy if this is an inbound rule, or the outbound_policy if this is an outbound rule.
addresses
Required
object
Allowed IPv4 or IPv6 addresses. A Rule can have up to 255 addresses or networks listed across its IPv4 and IPv6 arrays. A network and a single IP are treated as equivalent when accounting for this limit.
ipv4
array
of strings
A list of IPv4 addresses or networks. Must be in IP/mask format.
ipv6
array
of strings
A list of IPv6 addresses or networks. Must be in IP/mask format.
description
string
1..100
characters
Used to describe this rule. For display purposes only.
label
string
3..32
characters
Used to identify this rule. For display purposes only.
ports
string
A string representing the port or ports on which traffic will be allowed:
The string may be a single port, a range of ports, or a comma-separated list of single ports and port ranges. A space is permitted following each comma.
A range of ports is inclusive of the start and end values for the range. The end value of the range must be greater than the start value.
Ports must be within 1 and 65535, and may not contain any leading zeroes. For example, port “080” is not allowed.
Ports may not be specified if a rule’s protocol is ICMP or IPENCAP.
At least one port must be specified if a rule’s protocol is TCP or UDP.
The ports string can have up to 15 pieces, where a single port is treated as one piece, and a port range is treated as two pieces. For example, the string “22-24, 80, 443” has four pieces.
protocol
Required
string
Enum:
TCPUDPICMPIPENCAP
The type of network traffic to allow.
inbound_policy
Required
string
Enum:
ACCEPTDROP
The default behavior for inbound traffic. This setting can be overridden by updating the inbound.action property of the Firewall Rule.
outbound
array
of objects
The outbound rules for the firewall, as a JSON array.
action
Required
string
Enum:
ACCEPTDROP
Controls whether traffic is accepted or dropped by this rule. Overrides the Firewall’s inbound_policy if this is an inbound rule, or the outbound_policy if this is an outbound rule.
addresses
Required
object
Allowed IPv4 or IPv6 addresses. A Rule can have up to 255 addresses or networks listed across its IPv4 and IPv6 arrays. A network and a single IP are treated as equivalent when accounting for this limit.
ipv4
array
of strings
A list of IPv4 addresses or networks. Must be in IP/mask format.
ipv6
array
of strings
A list of IPv6 addresses or networks. Must be in IP/mask format.
description
string
1..100
characters
Used to describe this rule. For display purposes only.
label
string
3..32
characters
Used to identify this rule. For display purposes only.
ports
string
A string representing the port or ports on which traffic will be allowed:
The string may be a single port, a range of ports, or a comma-separated list of single ports and port ranges. A space is permitted following each comma.
A range of ports is inclusive of the start and end values for the range. The end value of the range must be greater than the start value.
Ports must be within 1 and 65535, and may not contain any leading zeroes. For example, port “080” is not allowed.
Ports may not be specified if a rule’s protocol is ICMP or IPENCAP.
At least one port must be specified if a rule’s protocol is TCP or UDP.
The ports string can have up to 15 pieces, where a single port is treated as one piece, and a port range is treated as two pieces. For example, the string “22-24, 80, 443” has four pieces.
protocol
Required
string
Enum:
TCPUDPICMPIPENCAP
The type of network traffic to allow.
outbound_policy
Required
string
Enum:
ACCEPTDROP
The default behavior for outbound traffic. This setting can be overridden by updating the outbound.action property of the Firewall Rule.
tags
Filterable
array
of strings
An array of tags applied to this object. Tags are for organizational purposes only.
Delete a Firewall resource by its ID. This will remove all of the Firewall’s Rules
from any Linode services that the Firewall was assigned to.
A firewall_delete Event is generated when this endpoint returns successfully.
Authorizations
personalAccessToken
oauth
firewall:read_write
Path Parameters
firewallId
integerRequired
ID of the Firewall to access.
Request Samples
Response Samples
Responses
Firewall View
GET
https://api.linode.com/v4/networking/firewalls/{firewallId}
Get a specific Firewall resource by its ID. The Firewall’s Devices will not be
returned in the response. Instead, use the
List Firewall Devices
endpoint to review them.
Authorizations
personalAccessToken
oauth
firewall:read_only
Path Parameters
firewallId
integerRequired
ID of the Firewall to access.
Request Samples
Response Samples
Responses
Firewall Update
PUT
https://api.linode.com/v4/networking/firewalls/{firewallId}
Updates information for a Firewall. Some parts of a Firewall’s configuration cannot
be manipulated by this endpoint:
A Firewall’s Devices cannot be set with this endpoint. Instead, use the
Create Firewall Device
and Delete Firewall Device
endpoints to assign and remove this Firewall from Linode services.
A Firewall’s Rules cannot be changed with this endpoint. Instead, use the
Update Firewall Rules
endpoint to update your Rules.
A Firewall’s status can be set to enabled or disabled by this endpoint, but it cannot be
set to deleted. Instead, use the
Delete Firewall
endpoint to delete a Firewall.
If a Firewall’s status is changed with this endpoint, a corresponding firewall_enable or
firewall_disable Event will be generated.
Authorizations
personalAccessToken
oauth
firewall:read_write
Path Parameters
firewallId
integerRequired
ID of the Firewall to access.
Request Samples
Request Body Schema
label
Filterable
string
3..32
characters
The Firewall’s label, for display purposes only.
Firewall labels have the following constraints:
Must begin and end with an alphanumeric character.
May only consist of alphanumeric characters, dashes (-), underscores (_) or periods (.).
Cannot have two dashes (--), underscores (__) or periods (..) in a row.
Must be between 3 and 32 characters.
Must be unique.
status
string
Enum:
enableddisabled
The status to be applied to this Firewall.
When a Firewall is first created its status is enabled.
An array of tags applied to this object. Tags are for organizational purposes only.
Response Samples
Responses
Firewall Devices List
GET
https://api.linode.com/v4/networking/firewalls/{firewallId}/devices
Returns a paginated list of a Firewall’s Devices. A Firewall Device assigns a
Firewall to a Linode service (referred to as the Device’s entity). Currently,
only Devices with an entity of type linode are accepted.
Authorizations
personalAccessToken
oauth
firewall:read_only
Path Parameters
firewallId
integerRequired
ID of the Firewall to access.
Query Parameters
page
Type:
integer
>=
1
Default:
1
Default:
1
The page of a collection to return.
page_size
Type:
integer
25..500
Default:
100
Default:
100
The number of items to return per page.
Request Samples
Response Samples
Responses
Firewall Device Create
POST
https://api.linode.com/v4/networking/firewalls/{firewallId}/devices
Creates a Firewall Device, which assigns a Firewall to a service (referred to
as the Device’s entity) and applies the Firewall’s Rules to the device.
Currently, only Devices with an entity of type linode are accepted.
A Firewall can be assigned to multiple Linode instances at a time.
A Linode instance can have one active, assigned Firewall at a time.
Additional disabled Firewalls can be assigned to a service, but they cannot be enabled if another active Firewall is already assigned to the same service.
A firewall_device_add Event is generated when the Firewall Device is added successfully.
Removes a Firewall Device, which removes a Firewall from the Linode service it was
assigned to by the Device. This will remove all of the Firewall’s Rules from the Linode
service. If any other Firewalls have been assigned to the Linode service, then those Rules
will remain in effect.
A firewall_device_remove Event is generated when the Firewall Device is removed successfully.
Authorizations
personalAccessToken
oauth
firewall:read_write
Path Parameters
firewallId
integerRequired
ID of the Firewall to access.
deviceId
integerRequired
ID of the Firewall Device to access.
Request Samples
Response Samples
Responses
Firewall Device View
GET
https://api.linode.com/v4/networking/firewalls/{firewallId}/devices/{deviceId}
Returns information for a Firewall Device, which assigns a Firewall
to a Linode service (referred to as the Device’s entity). Currently,
only Devices with an entity of type linode are accepted.
Authorizations
personalAccessToken
oauth
firewall:read_only
Path Parameters
firewallId
integerRequired
ID of the Firewall to access.
deviceId
integerRequired
ID of the Firewall Device to access.
Request Samples
Response Samples
Responses
Firewall Rules List
GET
https://api.linode.com/v4/networking/firewalls/{firewallId}/rules
Returns the inbound and outbound Rules for a Firewall.
Authorizations
personalAccessToken
oauth
firewall:read_only
Path Parameters
firewallId
integerRequired
ID of the Firewall to access.
Request Samples
Response Samples
Responses
Firewall Rules Update
PUT
https://api.linode.com/v4/networking/firewalls/{firewallId}/rules
Updates the inbound and outbound Rules for a Firewall.
Note: This command replaces all of a Firewall’s inbound and/or outbound rulesets with the values specified in your request.
Authorizations
personalAccessToken
oauth
firewall:read_write
Path Parameters
firewallId
integerRequired
ID of the Firewall to access.
Request Samples
Request Body Schema
inbound
array
of objects
The inbound rules for the firewall, as a JSON array.
action
Required
string
Enum:
ACCEPTDROP
Controls whether traffic is accepted or dropped by this rule. Overrides the Firewall’s inbound_policy if this is an inbound rule, or the outbound_policy if this is an outbound rule.
addresses
Required
object
Allowed IPv4 or IPv6 addresses. A Rule can have up to 255 addresses or networks listed across its IPv4 and IPv6 arrays. A network and a single IP are treated as equivalent when accounting for this limit.
ipv4
array
of strings
A list of IPv4 addresses or networks. Must be in IP/mask format.
ipv6
array
of strings
A list of IPv6 addresses or networks. Must be in IP/mask format.
description
string
1..100
characters
Used to describe this rule. For display purposes only.
label
string
3..32
characters
Used to identify this rule. For display purposes only.
ports
string
A string representing the port or ports on which traffic will be allowed:
The string may be a single port, a range of ports, or a comma-separated list of single ports and port ranges. A space is permitted following each comma.
A range of ports is inclusive of the start and end values for the range. The end value of the range must be greater than the start value.
Ports must be within 1 and 65535, and may not contain any leading zeroes. For example, port “080” is not allowed.
Ports may not be specified if a rule’s protocol is ICMP or IPENCAP.
At least one port must be specified if a rule’s protocol is TCP or UDP.
The ports string can have up to 15 pieces, where a single port is treated as one piece, and a port range is treated as two pieces. For example, the string “22-24, 80, 443” has four pieces.
protocol
Required
string
Enum:
TCPUDPICMPIPENCAP
The type of network traffic to allow.
inbound_policy
string
Enum:
ACCEPTDROP
The default behavior for inbound traffic. This setting can be overridden by updating the inbound.action property of the Firewall Rule.
outbound
array
of objects
The outbound rules for the firewall, as a JSON array.
action
Required
string
Enum:
ACCEPTDROP
Controls whether traffic is accepted or dropped by this rule. Overrides the Firewall’s inbound_policy if this is an inbound rule, or the outbound_policy if this is an outbound rule.
addresses
Required
object
Allowed IPv4 or IPv6 addresses. A Rule can have up to 255 addresses or networks listed across its IPv4 and IPv6 arrays. A network and a single IP are treated as equivalent when accounting for this limit.
ipv4
array
of strings
A list of IPv4 addresses or networks. Must be in IP/mask format.
ipv6
array
of strings
A list of IPv6 addresses or networks. Must be in IP/mask format.
description
string
1..100
characters
Used to describe this rule. For display purposes only.
label
string
3..32
characters
Used to identify this rule. For display purposes only.
ports
string
A string representing the port or ports on which traffic will be allowed:
The string may be a single port, a range of ports, or a comma-separated list of single ports and port ranges. A space is permitted following each comma.
A range of ports is inclusive of the start and end values for the range. The end value of the range must be greater than the start value.
Ports must be within 1 and 65535, and may not contain any leading zeroes. For example, port “080” is not allowed.
Ports may not be specified if a rule’s protocol is ICMP or IPENCAP.
At least one port must be specified if a rule’s protocol is TCP or UDP.
The ports string can have up to 15 pieces, where a single port is treated as one piece, and a port range is treated as two pieces. For example, the string “22-24, 80, 443” has four pieces.
protocol
Required
string
Enum:
TCPUDPICMPIPENCAP
The type of network traffic to allow.
outbound_policy
string
Enum:
ACCEPTDROP
The default behavior for outbound traffic. This setting can be overridden by updating the outbound.action property of the Firewall Rule.
Response Samples
Responses
IP Addresses List
GET
https://api.linode.com/v4/networking/ips
Returns a paginated list of IP Addresses on your Account, excluding private addresses.
Authorizations
personalAccessToken
oauth
ips:read_only
Request Samples
Response Samples
Responses
IP Address Allocate
POST
https://api.linode.com/v4/networking/ips
Allocates a new IPv4 Address on your Account. The Linode must be configured to support additional addresses - please open a support ticket requesting additional addresses before attempting allocation.
Authorizations
personalAccessToken
oauth
ips:read_write,linodes:read_write
Request Samples
Request Body Schema
linode_id
Required
integer
The ID of a Linode you you have access to that this address will be allocated to.
public
Required
boolean
Whether to create a public or private IPv4 address.
type
Required
string
Enum:
ipv4
The type of address you are requesting. Only IPv4 addresses may be allocated through this endpoint.
Response Samples
Responses
IP Addresses Assign
POST
https://api.linode.com/v4/networking/ips/assign
Assign multiple IPv4 addresses and/or IPv6 ranges to multiple Linodes in one Region. This allows swapping, shuffling, or otherwise reorganizing IPs to your Linodes.
The following restrictions apply:
All Linodes involved must have at least one public IPv4 address after assignment.
Linodes may have no more than one assigned private IPv4 address.
Linodes may have no more than one assigned IPv6 range.
Open a Support Ticket to request additional IPv4 addresses or IPv6 ranges beyond standard account limits.
Note: Removing an IP address that has been set as a Managed Linode’s ssh.ip causes the Managed Linode’s SSH access settings to reset to their default values. To view and configure Managed Linode SSH settings, use the following commands:
The list of assignments to make. You must have read_write access to all IPs being assigned and all Linodes being assigned to in order for the assignments to succeed.
address
Required
string<ipv4|ipv6/prefix_length>
The IPv4 address or IPv6 range for this assignment.
Must be an IPv4 address or an IPv6 range you can access in the Region specified.
IPv6 ranges must include a prefix length of /56 or /64, for example: 2001:db8:3c4d:15::/64.
Assignment of an IPv6 range to a Linode updates the route target of the range to the assigned Linode’s SLAAC address.
May be a public or private address.
linode_id
Required
integer
The ID of the Linode to assign this address to. The IP’s previous Linode will lose this address, and must end up with at least one public address and no more than one private address once all assignments have been made.
region
Required
string
The ID of the Region in which these assignments are to take place. All IPs and Linodes must exist in this Region.
Response Samples
Responses
IP Addresses Share
POST
https://api.linode.com/v4beta/networking/ips/share
Beta
Configure shared IPs.
IP sharing allows IP address reassignment (also referred to as IP failover) from one Linode to another if the primary Linode becomes unresponsive. This means that requests to the primary Linode’s IP address can be automatically rerouted to secondary Linodes at the configured shared IP addresses.
IP failover requires configuration of a failover service (such as Keepalived) within the internal system of the primary Linode.
Authorizations
personalAccessToken
oauth
ips:read_write,linodes:read_write
Request Samples
Request Body Schema
ips
Required
array
of strings
A list of secondary Linode IPs to share with the primary Linode.
Can include both IPv4 addresses and IPv6 ranges (omit /56 and /64 prefix lengths)
Can include both private and public IPv4 addresses.
You must have access to all of these addresses and they must be in the same Region as the primary Linode.
Enter an empty array to remove all shared IP addresses.
linode_id
Required
integer
The ID of the primary Linode that the addresses will be shared with.
Response Samples
Responses
IP Address View
GET
https://api.linode.com/v4/networking/ips/{address}
Returns information about a single IP Address on your Account.
Authorizations
personalAccessToken
oauth
ips:read_only
Path Parameters
address
string<ip>Required
The address to operate on.
Request Samples
Response Samples
Responses
IP Address RDNS Update
PUT
https://api.linode.com/v4/networking/ips/{address}
Sets RDNS on an IP Address. Forward DNS must already be set up for reverse DNS to be applied. If you set the RDNS to null for public IPv4 addresses, it will be reset to the default ip.linodeusercontent.com RDNS value.
Authorizations
personalAccessToken
oauth
ips:read_write
Path Parameters
address
string<ip>Required
The address to operate on.
Request Samples
Request Body Schema
rdns
Nullable
Required
string
The reverse DNS assigned to this address. For public IPv4 addresses, this will be set to a default value provided by Linode if not explicitly set.
Response Samples
Responses
Linodes Assign IPv4s
POST
https://api.linode.com/v4/networking/ipv4/assign
Assign multiple IPv4 addresses and/or IPv6 ranges to multiple Linodes in one Region. This allows swapping, shuffling, or otherwise reorganizing IPs to your Linodes.
The following restrictions apply:
All Linodes involved must have at least one public IPv4 address after assignment.
Linodes may have no more than one assigned private IPv4 address.
Linodes may have no more than one assigned IPv6 range.
Open a Support Ticket to request additional IPv4 addresses or IPv6 ranges beyond standard account limits.
Note: Removing an IP address that has been set as a Managed Linode’s ssh.ip causes the Managed Linode’s SSH access settings to reset to their default values. To view and configure Managed Linode SSH settings, use the following commands:
The list of assignments to make. You must have read_write access to all IPs being assigned and all Linodes being assigned to in order for the assignments to succeed.
address
Required
string<ipv4|ipv6/prefix_length>
The IPv4 address or IPv6 range for this assignment.
Must be an IPv4 address or an IPv6 range you can access in the Region specified.
IPv6 ranges must include a prefix length of /56 or /64, for example: 2001:db8:3c4d:15::/64.
Assignment of an IPv6 range to a Linode updates the route target of the range to the assigned Linode’s SLAAC address.
May be a public or private address.
linode_id
Required
integer
The ID of the Linode to assign this address to. The IP’s previous Linode will lose this address, and must end up with at least one public address and no more than one private address once all assignments have been made.
region
Required
string
The ID of the Region in which these assignments are to take place. All IPs and Linodes must exist in this Region.
Response Samples
Responses
IPv4 Sharing Configure
POST
https://api.linode.com/v4/networking/ipv4/share
IP sharing allows IP address reassignment (also referred to as IP failover) from one Linode to another if the primary Linode becomes unresponsive. This means that requests to the primary Linode’s IP address can be automatically rerouted to secondary Linodes at the configured shared IP addresses.
IP failover requires configuration of a failover service (such as Keepalived) within the internal system of the primary Linode.
Authorizations
personalAccessToken
oauth
ips:read_write,linodes:read_write
Request Samples
Request Body Schema
ips
Required
array
of strings
A list of secondary Linode IPs to share with the primary Linode.
Can include both IPv4 addresses and IPv6 ranges (omit /56 and /64 prefix lengths)
Can include both private and public IPv4 addresses.
You must have access to all of these addresses and they must be in the same Region as the primary Linode.
Enter an empty array to remove all shared IP addresses.
linode_id
Required
integer
The ID of the primary Linode that the addresses will be shared with.
Response Samples
Responses
IPv6 Pools List
GET
https://api.linode.com/v4/networking/ipv6/pools
Displays the IPv6 pools on your Account. A pool of IPv6 addresses are routed to all of your Linodes in a single Region. Any Linode on your Account may bring up any address in this pool at any time, with no external configuration required.
Authorizations
personalAccessToken
oauth
ips:read_only
Query Parameters
page
Type:
integer
>=
1
Default:
1
Default:
1
The page of a collection to return.
page_size
Type:
integer
25..500
Default:
100
Default:
100
The number of items to return per page.
Request Samples
Response Samples
Responses
IPv6 Ranges List
GET
https://api.linode.com/v4/networking/ipv6/ranges
Displays the IPv6 ranges on your Account.
An IPv6 range is a /64 or /54 block of IPv6 addresses routed to a single Linode in a given Region.
Your Linode is responsible for routing individual addresses in the range, or handling traffic for all the addresses in the range.
Access the IPv6 Range Create (POST /networking/ipv6/ranges) endpoint to add a /64 or /56 block of IPv6 addresses to your account.
Authorizations
personalAccessToken
oauth
ips:read_only
Query Parameters
page
Type:
integer
>=
1
Default:
1
Default:
1
The page of a collection to return.
page_size
Type:
integer
25..500
Default:
100
Default:
100
The number of items to return per page.
Request Samples
Response Samples
Responses
IPv6 Range Create
POST
https://api.linode.com/v4/networking/ipv6/ranges
Creates an IPv6 Range and assigns it based on the provided Linode or route target IPv6 SLAAC address. See the ipv6 property when accessing the Linode View (GET /linode/instances/{linodeId}) endpoint to view a Linode’s IPv6 SLAAC address.
Either linode_id or route_target is required in a request.
linode_id and route_target are mutually exclusive. Submitting values for both properties in a request results in an error.
Upon a successful request, an IPv6 range is created in the Region that corresponds to the provided linode_id or route_target.
Your Linode is responsible for routing individual addresses in the range, or handling traffic for all the addresses in the range.
Access the IP Addresses Assign (POST /networking/ips/assign) endpoint to re-assign IPv6 Ranges to your Linodes.
Note: The following restrictions apply:
A Linode can only have one IPv6 range targeting its SLAAC address.
An account can only have one IPv6 range in each Region.
Removes this IPv6 range from your account and disconnects the range from any assigned Linodes.
Note: Shared IPv6 ranges cannot be deleted at this time. Please contact Customer Support for assistance.
Authorizations
personalAccessToken
oauth
ips:read_write
Path Parameters
range
string<ipv6>Required
The IPv6 range to access. Corresponds to the range property of objects returned from the IPv6 Ranges List (GET /networking/ipv6/ranges) command.
Note: Omit the prefix length of the IPv6 range.
Request Samples
Response Samples
Responses
IPv6 Range View
GET
https://api.linode.com/v4/networking/ipv6/ranges/{range}
View IPv6 range information.
Authorizations
personalAccessToken
oauth
ips:read
Path Parameters
range
string<ipv6>Required
The IPv6 range to access. Corresponds to the range property of objects returned from the IPv6 Ranges List (GET /networking/ipv6/ranges) command.
Note: Omit the prefix length of the IPv6 range.
Request Samples
Response Samples
Responses
VLANs List
GET
https://api.linode.com/v4beta/networking/vlans
Beta
Returns a list of all Virtual Local Area Networks (VLANs) on your Account. VLANs provide
a mechanism for secure communication between two or more Linodes that are assigned to the
same VLAN and are both within the same Layer 2 broadcast domain.
VLANs are created and attached to Linodes by using the interfaces property for the following endpoints:
Note: Only Next Generation Network (NGN) data centers support VLANs. Use the Regions (/regions) endpoint to view the capabilities of data center regions.
If a VLAN is attached to your Linode and you attempt to migrate or clone it to a non-NGN data center,
the migration or cloning will not initiate. If a Linode cannot be migrated because of an incompatibility,
you will be prompted to select a different data center or contact support.
Note: See the VLANs Overview to view additional specifications and limitations.
